Why adding RFM69 compatibility to OpenMqttGateway

The next release of OpenMQTTGateway will introduce the compatibility with RFM69 transceivers based on the work of lowpowerlab and bbx10.

After some discussions about what will be the new module for OpenMQTTGateway we concluded that the rfm69 from HopeRF would be a good candidate. I did the implementation with the most powerfull variant of RFM69 the RFM69HCW.

It offers in one module :

Emission and reception
It support multiple frequencies 315, 433, 868 and 915mhz
It has a range of several hundred meters
It has acknowledgment, you know when the data sent has been received by the recipients
It can adapt its power related to the distance between sender and receiver

In some word you can now have mqtt data from far sensors with low power consumption.

This first implementation support the rfm69 library which make it compatible de facto with moteinos low power boards.

A second step could be to integrate the library from jeelabs to be compatible with jeenodes and openenergymonitor.

And we can also explore the replacement of the base RF receiver and emitter of the gateway, maybe a big work to do...

As you see there is a lot of things to build and explore with rfm69 !

Commentaires

Posts les plus consultés de ce blog

433toMQTTto433 - Bidirectional ESP8266 NodeMCU gateway between RF 433Mhz signal and MQTT

The goal is to act as a gateway between 433Mhz sensors and a MQTT broker or between the MQTT broker and 433Mhz actuators, It enables to: receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data publish MQTT data to a different topic related to received 433Mhz signal It can be an interesting part in an home automation system so as to interface sensors and actuators (wall sockets) with software like openhab . List of compatible sensors here The interest of putting this gateway to an ESP8266 and not on a raspberry pi is to be able to manage security actions at gateway level (power on a siren, cut power to certain devices) following RF data received by sensors without being dependent to the PI for security related actions. [EDIT] all infos are now centralized into the github repository take a look at it you will find up to date info about OpenMQTTGateway You need: Software: Mosquitto Arduino IDE latest version (tested ok with 1.6.10

Infrared IR, 433mhz and MQTT on ESP8266 bidirectional gateway OpenMQTTGateway

Following discussions on the home assistant forum people gave me the idea to add Infrared communication to the 433mhz gateway. The goal is to act as a gateway between 433Mhz sensors, infrared remote controls and a MQTT broker or between the MQTT broker and 433Mhz actuators, infrared devices, It enables to: receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data publish MQTT data to a different topic related to received 433Mhz signal receive MQTT data from a topic and send infrared signal corresponding to the received MQTT data publish MQTT data to a different topic related to received infrared signal It can be an interesting part in an home automation system so as to interface sensors and actuators (wall sockets), your tv, home cinema, hifi ... with software like openhab or home assistant . List of compatible RF sensors here [EDIT] all infos are now centralized into the github repository take a look at it you will find up to d

Get your BLE sensors data into Home Assistant in 5 minutes

You can now upload your board directly from the web browser! So let's imagine you want to read data from a sensor like a Mi Flora, an LYWSD03MMC, a weight scale, or any other BLE sensor from this list Plug an ESP32 dev board to your computer USB port Go to this website: https://docs.openmqttgateway.com/upload/web-install.html Select esp32dev-ble Click the install button Depending on your board you may have to press the BOOT button Choose the port that the ESP is connected to. Wait until the process is complete. Release the BOOT button That's it, OMG is now loaded into your ESP32 board without Arduino IDE, platformIO or a binary flasher. Here are the steps in images: Now comes the Home Assistant part: Add the MQTT integration and activate auto discovery Create a user and a password (Configuration->Users) without administrator right for the gateway Well, this is enough for Home Assistant. So let's now connect both: Check the Wifi Access points available with your smartph

1 Technophile