Accéder au contenu principal

OpenMQTTGateway now reads Xiaomi Mijia Temperature and Humidity sensor

In the path of integrating BLE devices to OpenMQTTGateway I have found the Xiaomi Mi Jia Humidity and temperature sensor to be a good candidate.

This little indoor sensor is able to measure temperature and humidity and to transmit these data by bluetooth low energy to your smartphone.




As we already integrated another BLE device (Mi Flora) why not extending the integration scope of OpenMQTTGateway to this one.

I ordered one to see if I was able to extract data from it. After a few weeks, I received it, a first test with nRF connect application showed me that this device diffuses data in a quite similar way compared to Mi Flora (using BLE service data exposition).

From this point I had to determine the differences between the data sent from mi flora and the data sent from mi jia hum & temp sensor. The reverse engineering was similar to the one done with Mi Flora and with some offset implementation in the program I was able to read easily the humidity and temperature of the sensor.

You can find now these two values on a mqtt broker:
home/OpenMQTTGateway/BTtoMQTT/4C6WWWWWWC79/name MJ_HT_V1
home/OpenMQTTGateway/BTtoMQTT/4C6WWWWWWC79 -87

home/OpenMQTTGateway/BTtoMQTT/4C6WWWWWW3C79/tem 19.7

home/OpenMQTTGateway/BTtoMQTT/4C6WWWWWWC79/name MJ_HT_V1
home/OpenMQTTGateway/BTtoMQTT/4C6WWWWWWC79 -85
home/OpenMQTTGateway/BTtoMQTT/4C6WWWWWWC79/hum 50.7

As with the Mi Flora the values are diffused one per scan (you get temp on one scan and hum on the second or again the temp) indeed diffusion of value or another is handled by the sensor not the gateway.




Commentaires

  1. Hi!
    What about reading historical data from the sensor ?

    With Mi Flora it's possible

    RépondreSupprimer
  2. Hi, It's possible in mi flora by connecting to the sensor, currently it is not the reading method used. But could be added in the future. For mi jia I don't know if it stores history data.

    RépondreSupprimer

Enregistrer un commentaire

Posts les plus consultés de ce blog

433toMQTTto433 - Bidirectional ESP8266 NodeMCU gateway between RF 433Mhz signal and MQTT

The goal  is to act as a gateway between 433Mhz sensors and a MQTT broker or between the MQTT broker and 433Mhz actuators, It enables to: receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data  publish MQTT data to a different topic related to received 433Mhz signal  It can be an interesting part in an home automation system so as to interface sensors and actuators (wall sockets) with software like openhab . List of compatible sensors here The interest of putting this gateway to an ESP8266 and not on a raspberry pi is to be able to manage security actions at gateway level (power on a siren, cut power to certain devices) following RF data received by sensors without being dependent to the PI for security related actions. [EDIT] all infos are now centralized into  the github repository  take a look at it you will find up to date info about OpenMQTTGateway You need: Software: Mosquitto Arduino IDE latest version (tested ok with 1.6.10

Infrared IR, 433mhz and MQTT on ESP8266 bidirectional gateway OpenMQTTGateway

Following discussions on the home assistant forum people gave me the idea to add Infrared communication to the 433mhz gateway.  The goal is to act as a gateway between 433Mhz sensors, infrared remote controls and a MQTT broker or between the MQTT broker and 433Mhz actuators, infrared devices, It enables to: receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data  publish MQTT data to a different topic related to received 433Mhz signal  receive MQTT data from a topic and send infrared signal corresponding to the received MQTT data  publish MQTT data to a different topic related to received infrared signal  It can be an interesting part in an home automation system so as to interface sensors and actuators (wall sockets), your tv, home cinema, hifi ... with software like  openhab  or home assistant . List of compatible RF sensors here [EDIT] all infos are now centralized into the github repository  take a look at it you will find up to d

Get your BLE sensors data into Home Assistant in 5 minutes

You can now upload your board directly from the web browser!  So let's imagine you want to read data from a sensor like a Mi Flora, an LYWSD03MMC, a weight scale, or any other BLE sensor from this list  Plug an ESP32 dev board to your computer USB port Go to this website: https://docs.openmqttgateway.com/upload/web-install.html Select esp32dev-ble Click the install button Depending on your board you may have to press the BOOT button Choose the port that the ESP is connected to. Wait until the process is complete. Release the BOOT button That's it, OMG is now loaded into your ESP32 board without Arduino IDE, platformIO or a binary flasher. Here are the steps in images: Now comes the Home Assistant part: Add the MQTT integration and activate auto discovery Create a user and a password (Configuration->Users) without administrator right for the gateway Well, this is enough for Home Assistant. So let's now connect both: Check the Wifi Access points available with your smartph